| Specification |
|
7.5KW |
11KW |
15KW |
18.5KW |
22KW |
30KW |
| Rotation speed range of main shaft (rpm) |
|
0-4000 |
0-3000 |
0-3000 |
0-3000 |
1-2000 |
0-1470 |
| Motor output power(KW) |
|
7.5 |
11 |
15 |
18.5 |
22 |
30 |
| Pump output power(KW) |
|
0.75 |
0.75 |
0.75 |
1.1 |
1.5 |
1.5 |
| Height from center line of main shaft to work table(mm) |
|
125 |
125 |
125 |
125 |
125 |
125 |
| Rotation direction of main shaft |
|
Positive, negative |
Positive, negative |
Positive, negative |
Positive, negative |
Positive, negative |
Positive, negative |
| Testable cylinders of injection pump |
|
12 |
12 |
12 |
12 |
12 |
12 |
| Standard model of fuel injector |
|
|
|
|
|
|
|
| oil injection count range |
|
0-1000 |
0-1000 |
0-1000 |
0-1000 |
0-1000 |
0-1000 |
| Capacity of oil tank (L) |
|
>50 |
>50 |
>50 |
>50 |
>100 |
>100 |
| Pressure of fuel system |
High |
0-4 |
0-4 |
0-4 |
0-4 |
0-4 |
0-4 |
| |
Low |
0-0.4 |
0-0.4 |
0-0.4 |
0-0.4 |
0-0.4 |
0-0.4 |
| Supply oil capacity (L/min) |
|
>10 |
>10 |
>10 |
>10 |
>20 |
>20 |
| Temperature of fuel () |
|
402 |
402 |
402 |
402 |
402 |
402 |
| Precise of fuel filter () |
|
5 |
5 |
5 |
5 |
5 |
5 |
| Capacity of measuring cup (ml) |
|
45/150 |
45/150 |
45/150 |
45/150 |
45/260 |
45/260 |
| Pressure of air way (Mpa) |
Positive |
0-0.3 |
0-0.3 |
0-0.3 |
0-0.3 |
0-0.3 |
0-0.3 |
| Pressure of air way (Mpa) |
Negative |
-0.05 |
-0.05 |
-0.05 |
-0.05 |
-0.05 |
-0.05 |
| DC voltage (V) |
|
12/24 |
12/24 |
12/24 |
12/24 |
12/24 |
12/24 |
| 1.Test each cylinder's oil supply capacity at various rotation speeds. |
9.Test the interior pressure of distribution pumps. |
| 2.Statically check the start point and interval angle of oil supply of each cylinder. |
10.Test the negative pressure performance of pneumatic speed regulators. |
| 3.Check and adjust the performance of meachanical speed regulators. |
11.Test the oil supply pressure of distribution pump |
| 4.Test the electromagnetic valve of distribution pump . |
12.Measure the oil-return quantity of distribution pump. |
| 5.Check the performance of pneumatic speed regulators |
13.Self-suction joint |
| 6.Test the sealing performance of injection pump. |
14.Print(optional) |
| 7.Check the performance of pressure compensators |
15.Database(optional) |
| 8.Measure the advance angle of advance device |
16.Test the tack bar travle(optional) |
